Camera Support Rental
Directors Wireless 7” Monitor
SmallHD 702 Touch monitor & Teradek Bolt 500XT wireless.Transmitter has HDMI & HDSDI inputs. Monitor comes out of thecase fully assembled with hood on as well, just put the strap around Your head & add your own V-Mount battery or rent one from us.
$150.00 Daily w/o batteries


ParaLinx Crossbow /Arrow Wireless Video Monitoring. Camera power is by Power Tap or Lemo Connector.
Monitor is Powered by V-Mount Batteries with Power Tap. System Comes with Panasonic BT-LH910 Monitor & Hood. $90.00 Daily

CineGears 1/4-20 Mount Four Power-Tap Distribution Module with Voltage Indicator & 2 USB Ports
Now you can mount the CineGears to your Cheese Plate of your camera. This device splits your P-Tap four ways but allows fixed mounting using a 1/4-20 NC Thumbscrew to professional cameras. $20.00/day

ProPrompter by Bodelin w/wireless remote $55.00 daily



Denecke TS-TCB 800 LED Matrix Time Code Slate $75.00/day

ScriptBoy $45.00/day

Teradek WiFi wireless video now available for you iPad. $45.00/day

CineGears Uncompressed Wireless 3G/HD/SDI and HDMI 1080p60 fps, 10bit, 400 Meter.

Sachtler Video 25
Capacity 77lbs
150mm Bowl
Aluminum Legs
Floor Spreader

Sachtler Video 20
– 55Lb. Capacity
– Dual Stage Carbon Fiber Tripod
– Dollies have track locks to provide tricycle steering

Sachtler Video 18P
– 44Lbs. Capacity
– Dual Stage Carbon Fiber Tripod
– a Dolly with track locks maybe added to provide tricycle steering

Vinten 250 Tripod System
– 72Lb Capacity
– Electronic Drag Display
– Carbon Fiber Tripod
– Dolly Wheels Available

Manfrotto 504HD Tripod System
– 16.5Lb. Capacity
– Dual Stage Legs
– Mid Level Spreader
– Dolly Wheels available

Manfrotto 509HD Tripod System
– 29Lb. Capacity
– Dual Stage Legs
– Mid Level Spreader
– Dolly Wheels available

Sachtler Video 80 Fluid Head
– 175Lb Plus Capacity
– Dual Handle
– V – Wedge Type Plate
– Comes with Eye Piece / View Finder Leveler
– Bottom Mount is Mitchell Mount

Video Scaffolding Single Height is 71” to the top of the Platform & Low Level Height is 25”. Platform Width is 29” and 67” in Length. Platforms are adjustable in height. Both units have Tripod Foldable Latch Hooks for lashing Tripod to Platform. ngs.


Spider TR2SP2 Spider Pod System
Consists of: Tripod Riser, Standing Platform & hard Case. $85.00 Daily

Vinten Cygnet Post Head
capable of allowing perfect balance of camera even aimed straight up from horizon. Capacity 25lbs.

Edelkrone Slider Plus with Pro Pack Motion Kit.
( 3’ sliding when used with tripod )
Can be used with Canon LP-E6 batteries that are supplied or V-Mount Batteries optional.
Note this one is the heavy Duty Type and has the V-Mount option on the Head option.
For more information please visit https://edelkrone.com/products/sliderplus

DJI Ronin-M 3
- Supports Cameras up to 8 Pounds
- Precision of Control: ±0.02°
- Transmitter for Remote Pan/Tilt Control
- Tool-Less Balance Adjustment System
- Assistant Software for iOS and Windows
- Bluetooth Wireless Interface for Setup
- Silent Mode for Quiet Operation
- USB and PowerTap Power Outputs

LAing V8 Stabilizer Vest
Overview:
With a stretchable rope on it, V8 provides you different point of view. Sensitive suspension arm running smoothly, can very easily reduce the upper and lower vibration in the floating range of rising and falling. It is very convenient to have a small angle change, no need to adjust the suspension rope.
Metal adjustable supported rod and back support bar are designed to fulfill a stereotyped effect for different shape of the photographer.
Features:
1. Professional climbing carabiner, bearing more and safer; Hang rope length can be adjusted by stretching, to adapt to the different point of view.
2. Sensitive suspension arm running smoothly, can very easily in the floating range of rising and falling, reduce the upper and lower vibration. It is very
convenient to have a small angle change, no need to adjust the suspension rope.
3. Professional oxford waterproof textile materials, wear-resistant, waterproof, more durable.
4. Metal adjustment support rod, easy to adjust the vest to suit different body of the photographer, and has a stereotyped effect.
5. Back support bar using simple knob design, easy to adjust lever height from top to bottom, to adapt to the different shape of the photographer
Specifications
Payload: 5.51-13.23Ib/2.5-6kg
Material: Aluminum alloy, fabric
Waist measurement: 34.25-48.82inch/87-124cm
Max. length of the rods: 39.37inch/100cm
Strap length: 47.24inch/120cm
Clamp diameter: 0.98-1.38inch/2.5-3.5cm
Net weight: 9.7Ib/4.4kg
Package dimensions: 27.17 x 11.42 x 10.63inch/69 x 29 x 27cm
Gross weight: 13.23Ib/6kg

Dana Dolly $75.00/day
The Dana Dolly Portable Dolly System Rental Kit with universal track ends is a heavy duty camera dolly platform that rides on 16 custom modified soft polyurethane wheels that resist flat spotting and use ABEC-7 rated precision bearings providing you with extremely smooth dolly shots. This kit is complete with 75, 100, and 150mm bowl adapters, and comes in a custom flight case. The wheel trucks swivel, allowing the dolly to ride on available straight or curved track, which you must source separately. The manufacturer recommends using standard speed rail or Schedule 80 aluminum pipe of compatible size. The dolly includes two universal track ends, which accept inch and a quarter pipe (standard speed rail) up to 1.9″ O.D., and fit into available standard Junior stand receivers or 5/8″ Baby pins. A center support is included for long track runs or when using heavy cameras.


Piccolo Crane
Camera Height 10’10” Minimum Height 2’ 8”. Comes with 3 sections of 8’ Track, Track Stair Block & Wedges.

Cameleon dolly w/ Dolly Wheels
( 6′ Mini Jib Can be added.)

Matthews Dolly
( 6′ Mini Jib Can be added.)

GlideCam GL-HD-4000 4-10Lb.

Matthews Hostess Tray Side Mount Car Kit 415167

Kessler Crane Approx. 10′ of vertical movement

Libec Allex Slider ALX S8 (pictured)
Sliding Range – 28″
Payload – 33Lbs.
Head Attachment – 3/8″ or 1/4″ with Skytracker Ball Head

Libec Allex Slider ALX S12
Sliding Range – 43.5″
Payload – 33Lbs.
Head Attachment – 3/8″ or 1/4″ with Skytracker Ball Head